China outside tap manufacturer and custom outside taps wholesaler from Yuanju Garden Tools.

Powered by China Products(Top Trade Directory of China Products and Manufacturers) and China Manufacturers(Top China Manufacturers Directory) 网络营销, 网站推广

E-mail: sales@gardentoolsale.com

Founded in 1993, China Yuanju Garden Tools Co., Ltd. is a high-tech China outside tap manufacturer and designer applying ourselves to making garden tools and and accessories. Equipped with modern and efficient facilities such as a computer-controlled intelligent injection machine and supersonic welder, our professional engineers are constantly striving to develop new and unique features and products to satisfy the need of the most particular and demanding customers. All of our products are ideal for home or commercial use, whether tending to patio, garden, shrubbery or maintaining municipal lawns and flowerbeds. Our research and development department acts as a seamless extension to base for both well engineered products economically design for the best values possible.
Our oem outside taps had been certified PAHS. ISO will adopt the ISO 9001 quality system certification, and our machine have obtained GS, CE, EC1, EC2, EMC, EPA, CARB, ETL, ect.

Purchase an off the shelf kit which comprises of a outside tap, a self cutting tap for inside which clamps to your existing cold water pipe and a flexible hose which connects the two taps together. Both methods of fitting a outside tap are very similar, with the special kit you will get a self cutting tap and by purchasing the individual items you will need to tee into the existing supply. Start by drilling a hole through the wall big enough for a piece of 15mm pipe to pass through, it is best to drill with a small diameter bit first all the way through the wall then drill in from each side with a larger drill bit.
Push a length of 15mm copper pipe through the wall and cut another piece of pipe long enough to reach from the pipe shoved through the wall to the approximate position of the Bib tap. Join these two pieces together using a elbow, now fasten the Back Plate on to the open piece of pipe, if you are using a compression joint put some PTFE tape around the thread. Push the back plate against the wall and mark the position of the drill holes, this is easy as the pipe will turn 360 degrees as the pipe is not yet connected inside!

Turn the back plate and attached pipe then it is not in your way and drill the three holes, plug the holes and fasten the back plate to the wall with either brass or stainless steel screws as normal screws will rust outside. Put plenty of PTFE tape around the thread on the Bib Tap and screw it into the Back Plate, hold the back plate with a pair of water pump pliers and screw the tap home. A high-performance product, the Europlus range is designed with convenience and ease-of-use in mind, with its enlarged loop-shaped levers - making it comfortable to use. a contemporary bathroom companion Made of solid metal with a chrome finish, the Eurosmart range features a thick metal handle and forward leaning dynamic lines. Perfect for the contemporary bathroom, Eurosmart provides enduring performance in great design. describes the actions that we take to ensure safe, high-quality drinking water. provides information about the quality of our drinking water.